Important Safety Notes - Roller Mini Basic E 01 Notice D'utilisation

eng
See the ROLLER'S radial presses operating instructions!

Important safety notes:

Important safety notes:
DANGER DANGER
Danger with a high degree of risk which results in death or severe injury (irreversible) if not heeded.
Do not use the ROLLER'S cable shears (Art.-No. 571887), the ROLLER'S Mini Basic E 01 (Art.-No. 578618) pressing tongs
or the ROLLER'S Basic E 01 (Art.-No. 571855) pressing tongs with pressing inserts on live electric cables. The tools are not
insulated and therefore provided no protection against electric shock. A live electric cable must be disconnected from the power
supply by a qualifi ed electrician before working on it.
The ROLLER'S cable shears are intended for cutting electric cables ≤ 300 mm
The ROLLER'S Mini Basic E 01 pressing tongs, ROLLER'S Basic E 01 pressing tongs are intended for pressing Klauke con-
nection material for electric cables ≤ 300 mm
All other uses are not for the intended purpose and are therefore prohibited.
Read and observe the safety notes and instructions delivered with the power tools. Only use the ROLLER'S Mini Basic E 01
pressing tongs, ROLLER'S Basic E 01 pressing tongs with the pressing inserts from Klauke series 22, narrow pressing, under
observance of the assembly instructions for the Klauke connection material.
Do not use the ROLLER'S cable shears, the ROLLER'S Mini Basic E 01 pressing tongs or the ROLLER'S Basic E 01 as well
as pressing inserts if they are damaged.
4
, in connection with suitable Klauke pressing inserts series 22, narrow pressing.
2
(Ø ≤ 30 mm).
2