Mounting The Dome Camera - Avigilon 1.0-H3-DP1 Guide D'installation

Mounting the Dome Camera

Caution — The dome camera must be mounted as
instructed below or problems with moisture may arise and
will not be covered by the dome camera warranty.
The dome camera must be mounted on a 1-1/2" NPT male threaded
wall or ceiling mounting bracket. The mounting bracket is not included
in the camera package.
Perform the following steps to mount the dome camera to a ceiling or
wall:
1. If installing outdoors, wrap the thread of the mounting
bracket with the supplied Teflon sealing tape to create a
water tight seal around the camera connection.
When applying the Teflon sealing tape, be sure to wrap in
the same direction that the mount will be tightened. This
will ensure the tape does not unravel when installing the
mating parts together.
5