Connecting Cables; Mounting The Camera - Avigilon 1.0W-H3-BO1-IR Guide D'installation

Connecting Cables

To connect the cables required for proper operation, complete the
following:
1. If there are external input or output devices that need to be
connected to the camera (for example: door contacts,
relays, speakers, etc), connect the devices to the camera's
I/O connector cable.
For more information, see Connecting to External Devices.
2. Connect power using one of the following methods:
•
•
3. Connect the Ethernet Port (RJ45 connector) to a network
using an Ethernet network cable. The Link LED in the
Configuration Panel under the camera will turn On once a
network link has been established.
4. Check that the Connection Status LED in the
Configuration Panel displays the correct state.
For more information, see LED Indicators.

Mounting the Camera

After the cable connections have been made, mount and secure the
camera.
1. Tuck the extra lengths of cables away:
•
Power over Ethernet (PoE) Class 3 — If PoE is
available, the camera is automatically detected
when the network cable is connected.
External Power — Connect the camera to an
external 12 VDC or 24 VAC power source through
the auxiliary power cables.
If you are flush mounting the camera, push the
extra lengths of cable through the cable hole in the
wall or ceiling.
5