One-Hand Operation; Setting Up/Hanging Up The Multimeter; Cleaning / Maintenance; Maintenance - Powerfix Profi PDM 300 A1 Manuel D'utilisation Et Informations Sur Les Services

One-hand operation

You can also use the multimeter with one
hand. To do so, insert a test probe [7] in one
of the slots on the back of the holster [2]. You
can then perform your measurements as usual
without having to put down the multimeter.

Setting up/hanging up the multimeter

You can set up or hang up the multimeter
using the holster [2]. Open out the stand at the
back of the holster [2] to set up the multimeter.
There is also a slot above the stand to
facilitate hanging up the multimeter.

Cleaning / maintenance

Maintenance

Maintenance work is necessary if the multimeter has been damaged or if liquid or objects
have penetrated inside the housing, the multimeter has been exposed to rain or moisture or
if it does not work correctly or has been dropped. In these cases, the multimeter should not
be used until it has been inspected by authorised service personnel. Only have qualified
personnel carry out the maintenance work on the device.
POWERFIX PDM 300 A1
English - 49