Further Safety Directions; Residual Risks; Operating - Grizzly Tools CH 2000 Li Traduction De La Notice D'utilisation Originale

2) FURTHER SAFETY DIRECTIONS

For your personal safety:
Wear suitable work clothes such
as boots with non-slip soles, sturdy
long trousers, gloves and goggles.
Do not wear long flowing clothing
or jewellery, as this may be caught
by moving parts. Do not use this
tool while walking barefooted or
while wearing open sandals.
• The appliance is designed for trim-
ming hedges. Do not use to cut
twigs, hard wood or other objects.
This could damage the appliance.
• Do not attempt to release a
blocked/jammed blade safety bar
before turning off the power and
removing the battery. There is a risk
of injury.
• When operating the appliance, al-
ways hold it well with both hands
and at some distance away from
your body. This enables better con-
trol of the power tool in unexpected
situations.
• Do not use the tool in the vicinity of
flammable liquids or gasses. Fire-
and explosion risk exist in the event of
a short circuit.
• The blades have to be checked for
wear in regular intervals and re-
sharpened. Blunt blades will overload
the machine. Resulting damages are
not covered by warranty.
• Do not attempt to repair the tool
yourself, unless you are schooled
in this field. All works, which are
not described in this manual, may
only be performed by our Service-
Centre. Many accidents are caused
by poorly maintained equipment.

3) RESIDUAL RISKS

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and the
manufacturer of their medical im-
plant before operating the machine.

Operating

Wear suitable clothing and work
gloves when working with the
equipment.
Wear eye and ear protection.
Ensure that the equipment is
functional before each use. The
On/Off switch and the safety
switch must not be held closed.
They must switch off the motor
when on is released. Should a
switch be damaged, stop working
with the equipment. Ensure that
the mains voltage value matches
the label on the equipment.
GB
63