Carton Contents - AQUAJOE SJ-SHSBB-GRY Mode D'emploi

EN
Unpacking

Carton Contents

• Top and bottom posts
• S-type nut
• M6x50 screw
• Hose holder
• Manuals + Registration card
1. Carefully remove the steel garden hose holder and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the steel garden hose
holder. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
1. To assemble the hose stand post, take the top and
bottom post and fit together by sliding the top post over
the connecting post. Depress the push button on the
connecting post enough to slide into the top post (Fig. 1).
Fig. 1
Top post
Connecting
post
customer service center at
®
Push
button
Bottom post
2. Slide the top post over the connecting post until the push
button locks into place in its respective hole on the top
post (Fig. 2).
Fig. 2
Connecting
post
3. Insert the hose holder into the corresponding holes on the
assembled hose stand post (Fig. 3 and Fig. 4).
Fig. 3
Fig. 4
3
Top
post
push
buttons
Bottom
post
Hose holder
Assembled
hose stand
post