Functions Menu; Touch; Tune - Viscount YP200 Manuel Du Propriétaire

owner's manual
Function Menu

TOUCH

Press and hold the TOUCH (G6) function on the
keyboard and press the DATA UP button on the
control panel.
Pressing the DATA button once, the vocal guide
signals the current active touch value.

TUNE

Allows you to change the overall intonation of the instrument. This function is very useful when
you play with other musicians because YP200 can be tuned according to the needs of the
moment.
Press and hold the Function Key ( A6),
corresponding to the TUNE function, and press
DATA UP or DATA DOWN button - the GRAND
PIANO button will blink and will play a reference
tone of the note A4. Use the DATA UP / DOWN
to change the intonation. The excursion of the
value ranges from A4 = 415.3 (-100 cents of a
semitone) to A4 = 466,16 (+100 cents of a
semitone). Pressing the button normally you will
get a unit change (± 1 cent of a semitone) by
pressing and holding the button the variation
proceeds until the reaching of extremes values.
To exit the TUNE function is necessary to release
the A6 button, and the last value stored will be
recorded.
By pressing the DATA
buttons repeatedly, you can
select one of the available
touch curve (SOFT;
NORMAL; HARD)
To select the default NORMAL curve,
simultaneously press the DATA UP/DOWN
buttons, while TOUCH function key (G6) is
held down.
touch tune temper. time s. effects
touch tune temper. time s. effects
Simultaneously pressing DATA UP and DATA
DOWN, the default value (A4 = 440Hz) will
be set.
YP200
maf eq midi backup help standby
maf eq midi backup help standby
EN - 5