Safety Notes - NEC Vector Engine 2.0 20B-P Guide De Mise En Route

Symbols used in this document and on warning labels
Attention
Indicates the presence of electric shock hazards.
Indicates the presence of a hot surface or
component. Touching this surface could result in
bodily injury.
Indicates there is a risk of explosion.
Indicates there is a risk of fire or fumes.
Prohibited Actions
Do not disassemble, repair, or modify the
product. Otherwise, an electric shock or fire
may be caused.
Do not touch the component specified by this
symbol. Otherwise, an electric shock or burn may
be caused.
Do not place the product near the fire. Otherwise,
a fire may be caused.
Mandatory Actions
Unplug the power cord of the product. Otherwise,
an electric shock or fire may be caused.
Make sure equipment is properly grounded.
Otherwise, an electric shock or fire may be
caused.
In addition to safety-related symbols urging caution, the following notations are used in this document. These notations have the
following meanings.
Important Indicates critical items that must be followed when handling the hardware or operating software.
Note
Indicates items that must be confirmed when handling the hardware or operating software.
Tip Indicates information that is helpful to keep in mind when using this product.

Safety notes

This section shows notes on using the product safely. Read this section carefully to ensure proper and safe use of the product. For
symbols, refer to "Safety precautions".
General
Do not use the product for services where critical high availability may directly affect human lives or high
reliability is required.
This product is not intended to be used for control facilities or devices concerning human lives, including medical
devices, nuclear facilities and devices, aeronautics and space devices, transportation facilities and devices; and
facilities and devices requiring high reliability. We assumes no liability for any accident resulting in personal
injury, death, or property damage if the product has been used in the above conditions.
Do not use the product if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the product and disconnect the power plug from the
outlet, then contact your sales representative. Using the product in such conditions may cause a fire.
Do not insert needles or metal objects.
Do not insert needles or metal objects into ventilation holes in the product. Doing so may cause an electric
shock.
Indicates the presence of mechanical parts that
can result in bodily injury.
Indicates the presence of mechanical parts that
can result in pinching or other bodily injury.
Indicates the presence of laser beam that cause
blindness.
Indicates a general notice or warning that cannot
be specifically identified.
Do not touch the product with wet hand.
Otherwise, an electric shock may be caused.
Do not use the product in the place where water
or liquid may pour. Otherwise, an electric shock
or fire may be caused.
Indicates a general prohibited action that cannot
be specifically identified.
Indicates a mandatory action that cannot be
specifically identified. Make sure to follow the
instruction.