User Interface; Power Button; Power Led - Motomaster ELIMINATOR 011-1905-6 Guide D'utilisation

19

User Interface

1. Internal Battery Level
Indicates the charge level of the internal battery.
2. Error LED
Illuminates Red if reverse polarity is detected, or blinks
On and Off when the internal battery temperature is too
high.

3. Power Button

Push to turn unit On and Off.

4. Power LED

Illunimates White when unit is On.
5. Light Mode Button
Toggles the ultra-bright LED light through 7 light modes:
100% > 50% > 10% > SOS > Blink > Strobe > Off
6. Jump Starting LED
Illuminates White when the jump starter is active. If the unit
is connected properly to a battery, the jump starter will
automatically detect a battery and go into jump starting
mode (LED flashes White when Manual Overide feature is
active).
7. Manual Override Button
To enable, push and hold for three (3) seconds.
WARNING: Disables safety protection and manually
forces the jump starter On. Only for use when a
battery is too low to be detected.