Installation (continued)
12. It maybe necessary to use shims between the
vehicle frame member and the plow mount. If
necessary, install shims (B8) along with fasteners
(B2, B9, B10). Washer (B9) is to be installed on
the outside of the vehicle frame opposite the plow
mount. See Figures 9 and 10.
13. Tighten all fasteners to torque specification listed.
14. See Warn plow push tube instruction manual for
installing plow mount flange (A3). See Figure 11.
WARN® INDUSTRIES
Install removed
fasteners
Figure 7 Place Bumper on vehicle
Figure 8 Install fasteners
B8
B6,B7
Figure 9 Install Shims
PAGE 6
B1
79816A5