Table Des Matières; Tools Required; Torque Specifications - Warn 79815 Instructions D'installation

Kit de montage de lame pour yamaha rhino 08+
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Failure to observe these instructions could lead to minor or moderate injury.
 Always take time to fully read and understand the installation and Operations Guide included with this product.
 Never operate this product if you are under 16 years of age.
 Never operate this product when under the influence of drugs, alcohol or medications.
Table of Contents
I.

Tools Required ..................................................... 2

II. Torque Specifications ........................................... 2
III. Parts List .............................................................. 3
IV. Installation ......................................................... 4-6
V. Operation .......................................................... 7-8
VI. Tips/Troubleshooting ............................................ 9
VII. Maintenance/Care ................................................ 9
I. Tools Required
• Ratchet
• Sockets:
10mm,13mm,16mm,17mm,19mm, 1/2"
• Wrenches:
10mm,13mm,16mm,17mm,19mm, 1/2"
• Torque Wrench
II. Torque Specifications
Please use the recommended torque specifications
when assembling this product unless otherwise speci-
fied in the instructions.
5/16" diameter bolt and nuts:
10mm diameter bolts and nuts 30 ft.lbs (40.7 N-m)
12mm diameter bolts an nuts
WARN® INDUSTRIES
CAUTION
Moving Parts Entanglement Hazard
Read installation and operating instructions thoroughly.
12 ft-lbs (16.5 N-m)
55 ft-lbs (74.6 N-m)
PAGE 2
79816A5

Publicité

Chapitres

Table des Matières
loading

Table des Matières