Inserting And Removing The Filter; Cleaning The Filter - KitchenAid KEK1522 Instructions

Masquer les pouces Voir aussi pour KEK1522:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CARE AND CLEANING

Inserting and removing the filter

Inserting the filter: The filter is located
behind the spout inside the Water Kettle.
Open the lid. Slide the filter down into the
slot behind the spout, making sure that the
curve facing outward on the filter matches
to the curve of the kettle.

Cleaning the filter

R emove filter from Water Kettle (see
"Inserting and removing the filter");
then rinse under running water.
10
Removing the filter: Open the lid. Grasp
the top of the filter, behind the spout, and
pull out to remove.
NOTE: If calcium deposits remain on the
filter, let it stand overnight in a solution
of water and white vinegar. Rinse the
filter thoroughly and replace in the
Water Kettle.

Publicité

Table des Matières
loading

Table des Matières