Call Waiting - Motorola IHF1000 Instructions D'installation

BTHandsfree_multi.book Page 32 Tuesday, July 12, 2005 8:46 AM

Call Waiting

When you are on a call, an audible beep signals a 2nd call.
Action
Press and release the ANSWER button to place the 1st
call on hold and answer the incoming call.
Each time you press and release the ANSWER button,
you toggle between active calls.
Note: If the ANSWER button is not pressed, the incoming
call is automatically rejected and sent to voicemail (if set
up on the phone).
Sending DTMF Tones
You can send DTMF tones from the phone keypad, or by
using the Enter command:
Action
1 Press the TALK button.
2 When prompted, say "Enter <digits>" to send
numbers as DTMF tones.
32