Parts Identification; Before Starting The Engine - Powerfist 8449027 Manuel De L'utilisateur

8449027

PARTS IDENTIFICATION

WARNING! Do not operate the device if any part is missing. Replace the missing part before operating.
Failure to do so could result in a malfunction and personal injury.
Remove the parts and accessories from
the packaging and inspect for damage.
Make sure that all items in the parts list
are included.
Contents:
• Vertical Gas Engine
IDENTIFICATION KEY
A Starter Handle Cord
B Dipstick/Oil Fill Tube
C Brake Lever
D Muffler
E Fuel Tank and Cap
F Air Cleaner Assembly
G Spark Plug
ASSEMBLY
The engine is preassembled.
OPERATION
PRE-OPERATION CHECKS
Check the engine's condition before operating to maximize the user's safety and the service life of the engine.
Ensure that the engine is level and the switch is in the OFF position before beginning the pre-operation checks.
General Condition
1. Look around and underneath the engine for signs of oil or gasoline leaks.
2. Remove any excessive dirt or debris, especially around the muffler and recoil starter.
3. Look for signs of damage.
4. Check that all shields and covers are in place.
5. Check that all nuts, bolts, and screws are tight.
Check the Engine
1. Check the fuel level. This will save time for refuelling later.
2. Check the engine oil level. Running the engine with a low oil level can cause engine damage (see How to
Check/Add Oil).
3. Check the air filter element. A dirty air filter will reduce engine performance.
4. Check the equipment powered by this engine.
5. Review the instructions provided with the equipment powered by this engine for precautions and
procedures that should be followed before starting the engine.

BEFORE STARTING THE ENGINE

Before starting the engine take these precautions:
1. Make sure spark plug, muffler, fuel cap and air cleaner are in place and secured. Do not crank engine with
spark plug removed.
Visit www.princessauto.com for more information
173cc OHV Vertical Gas Engine
V 3.7
Fig.1
5