JVC KD-R980BTS Manuel D'instructions page 27

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AUDIO SETTINGS
DTA SETTINGS
Digital Time Alignment sets the delay time of the speaker output to
create a more suitable environment for your vehicle.
For more information, refer to the illustration on page 28.
POSITION
Selects your listening position (reference point).
ALL: Not compensating ; FRONT RIGHT: Front right seat ;
FRONT LEFT: Front left seat ; FRONT ALL: Front seat
• [FRONT ALL] is displayed only when [X ' OVER TYPE] is set to
[2-WAY].
DISTANCE *
5
0FT to 20.01FT: Fine adjust the distance to compensate.
GAIN *
5
–8DB to 0DB: Fine adjust the output volume of the selected
speaker.
DTA RESET
YES: Resets the settings ([DISTANCE] and [GAIN]) of the selected
[POSITION] to default. ; NO: Cancels.
CAR SETTINGS
Identify your car type and rear speaker location in order to make the
adjustment for [DTA SETTINGS].
CAR TYPE
COMPACT/FULL SIZE CAR/WAGON/MINIVAN/SUV/
MINIVAN(LONG): Selects the type of vehicle. ; OFF: Not
compensating.
R-SP LOCATION *
6
Selects the location of the rear speakers in your vehicle to calculate
the furthest distance from the listening position selected (reference
point).
• DOOR/REAR DECK: Selectable only when [CAR TYPE] is selected
as [OFF], [COMPACT], [FULL SIZE CAR], [WAGON] or [SUV].
• 2ND ROW/3RD ROW: Selectable only when [CAR TYPE] is
selected as [MINIVAN] or [MINIVAN(LONG)].
X ' OVER TYPE
Caution: Adjust the volume before changing the [X ' OVER TYPE] to
avoid the sudden increase or decrease of the output level.
2-WAY
(Displayed only when [3-WAY] is selected)
YES: Selects two way crossover type. ; NO: Cancels.
3-WAY
(Displayed only when [2-WAY] is selected)
YES: Selects three way crossover type. ; NO: Cancels.
SOUND EFFECT
SPACE ENHANCE
(Not applicable for TUNER source.)
SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ;
OFF: Cancels.
SND RESPONSE
LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ;
OFF: Cancels.
SOUND LIFT
LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from
the speakers. ; OFF: Cancels.
VOL LINK EQ
ON: Boosts the frequency to reduce the noice heard from outside the
car or running noise of the tyres. ; OFF: Cancels.
K2 TECHNOLOGY
(Not applicable for TUNER source, SIRIUS XM source, and AUX source.)
ON: Improve the sound quality of compressed music. ; OFF: Cancels.
*
1
Displayed only when [SUBWOOFER SET] is set to [ON]. (  22)
*
2
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W].
(  24)
*
3
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or
[SUB.W/SUB.W]. (  24)
*
4
This adjustment will not affect the subwoofer output.
*
5
Before making an adjustment, select the speaker:
When 2-way crossover is selected:
FRONT LEFT (default)/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER
• [REAR LEFT], [REAR RIGHT], and [SUBWOOFER] is selectable only if a setting other
than [NONE] is selected for [REAR] or [SUBWOOFER] of [SPEAKER SIZE]. (  25)
• [REAR LEFT] and [REAR RIGHT] is displayed only when [SPK/PRE OUT] is set to
[REAR/SUB.W] or [REAR/REAR]. (  24)
• [SUBWOOFER] is displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or
[SUB.W/SUB.W]. (  24)
When 3-way crossover is selected:
TWEETER LEFT (default)/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER
• [WOOFER] is selectable only if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE]. (  25)
*
6
Displayed only when [X ' OVER TYPE ] is set to [2-WAY].
23
ENGLISH

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kd-r880bt

Table des Matières