Philips PT937 Mode D'emploi page 14

ENGLISH
14
B
A
- Rinse the outside of the shaving unit.
4 Pull the shaving unit off the shaver.
5 Turn the lock anticlockwise (A) and remove the retaining frame (B).
6 Remove and clean one shaving head at a time. Each shaving head
consists of a cutter and a guard.
Note: Do not clean more than one cutter and guard at a time, since they are
all matching sets. If you accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is restored.
7 Remove the cutter from the shaving guard and clean it under the tap.
Then clean the inside and outside of the shaving guard under the tap.