Hendi 221037 Mode D'emploi page 3

Dear Customer,
Thank you for purchasing this Hendi appliance. Please read this manual carefully before connecting the
appliance in order to prevent damage due to incorrect use. Read the safety regulations in particular very
carefully.
Technical data
Model
HENDI 221037
Unpacking, installation and connection
On opening the packaging, check carefully to make
sure the appliance is intact and that there are no
signs of damage. If in any doubt contact immediately
your dealer that will help you in a professional way.
The packaging materials should be collected and
disposed in conformity with the safety rules in force.
Keep out of the reach of children and irresponsible
persons because are potential sources of danger.
If you decide not to use the appliance anymore re-
member to unplug it so that it cannot be used, and
then cut the cable where it comes out of the appli-
ance. Contact specialized fi rms for information on
the disposal of the components of the appliance.
The installation must be carried out only by pro-
fessional qualified persons and must be comply
with the regulations in force in the place in which
the appliance is installed. Incorrect installation may
result in injury of persons or animals, or damage to
property, for which the manufacturer cannot be held
General warnings
Read thoroughly and stick closely to the instructions
and warnings.
Before use, ensure that the mains voltage is the same
as the voltage indicated on the data plate of the ma-
chine. Connect the appliance only to 10 Amp. Sockets
Dimentions
(mm)
180x290x(H)400
Weight Power
(kg) (W)
7 350
responsible.
Before using the appliance read carefully the notices
and the instructions:
• The appliance must be placed on a stable, fl at sur-
face.
• Not installed outside.
• Make sure that the appliance is not resting on the
power supply cable.
• Make sure the voltage and frequency values of the
supply mains correspond to the ratings indicated
on the label featuring the appliance's technical data.
• Make sure the ratings of the system are suitable
for the power absorbed by the appliance and/or
maximum voltage.
• It's compulsory to earth the appliance. It's compul-
sory to earth the appliance, complying to safety
laws in force.
• The external equipotential terminal must be con-
nected to a equipotential node
that are effi ciently earthed.
Always remove the plug from the socket before
carrying out any maintenance or cleaning of the
appliances.
Voltage
230 V, 1N, 50 Hz
EN
.
3