Fitting The Bicycle Carrier - XLC Azura Led Instructions D'emploi

5

Fitting the bicycle carrier

54
1. Assembling the bicycle carrier on the tow
bar
Make sure that the tow ball is not dirty or greasy. Fit
the bicycle carrier slightly tilted towards you on the
tow bar then bring it upright.
2. Loosen the clip
The two wings are kept together by a clip. Loosen
the clip in order to fold the wings out. The two wings
are kept together by a clip. Loosen the clip in order to
fold the wings out.
3. Fold out the right-hand wing
Fold the right-hand wing downwards to make it
horizontal. Keep the central tube as vertical as
possible.
You can release the bicycle carrier; it is now
clamped on the tow bar.
4. Connect the plug
Take the plug from the holder and insert it in the car's
plug socket. The plug has a 7- and a 13-pole side.
Cover the unused plug part with the cap supplied.