Viesta Eco 100 Mode D'emploi Original page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1. Fill the water tank(8) with fresh water.
ATTENTION:
No water will lead to red glimmering of function
indicator lamp(21) while making coff ee.
2. Fill the bean hopper(10) with your favorite and
well-roasted coff ee beans.
ATTENTION:
a. No bean in the bean hopper will lead to the grinder
rotating in vain, but it will stop automatically
in one minute while making coff e.
b. Do not use unroasted beans.
3. Press the power switch(7) to start the machine.
a. With the power on, the power indicator lamp(16)
and the logo indicator lamp(11) shall be lighted at
the same time.
b. With the power on, the water temperature indicator
lamp(18) is glimmering, which means the heating of
the machine, the glimmering will last one and a half
minutes for reaching the required temperature.
c. The sound of brewing unit(15) calibration can be
heard, you are not allowed to take any other
operation unless the sound disappears!
4. Release the water by rotaing anticlockwise hot
water & steam knob(12) until the water comes out
from milk frother(13).
ATTENTION:
With the new machine, the water pipes inside are
vacuum, so the pipes must be fi lled with water in
fi rst-time use, if you forget to release the water, the
machine will refuse to work.
[ EN p. 7 ]
Version: 8.0
KEN001KVA 19.09.2017

Publicité

Table des Matières
loading

Table des Matières