Daily Maintenance - Viesta Eco 100 Mode D'emploi Original

Daily maintenance

1. Brewing unit(15) cleaning:
a. Switch off the power;
b. Open the swinging door(4);
c. Take out the coffee dump container(3) and the drip tray(1).
d. Take out the brewing unit by pressing down the ear of funnel with
your thumb and drawing out the brewing unit with four fingers holding
around handle.
e. Clean the brewing unit(15) with brush and water.
ATTENTION: When you finished washing, please dry the unit, otherwise
it will make the powder stuck in coffee making.
f. Clean the sieves if necessary, screw down the rod on top of the brewing
unit(15) with a plastic tool (screw driver/ not provide).
ATTENTION: It may be a bit complicated in disassembling and re-fixing
sieves, sometimes you may just use brush and water to clean the sieves.
Do not disassemble sieves.
g. Put back the brewing unit(15) into the machine: push horizontally the
brewing unit along with its feet in the tracks into the machine.
The sound of "kata" shouw the successful action in pushing the unit into
its original place.
ATTENTION: Without the sound "kata" menas the brewing unit is not in its
original place, it will arise the red light of the function indicator lamp(21).
The machine refuses to work during coffee making.
[ EN p. 11 ]
Version: 8.0
KEN001KVA 19.09.2017