Corsair T2 Mode D'emploi page 5

5. Place the seat assembly onto the
multi-functional seat control base
by inserting the gas lift cylinder
into the center hole in the seat
control base.
A. Make sure the seat assembly is
firmly pressed down into place
before using the chair.
5 5
6. Seat back to seat assembly.
A. Remove the screws from the
seat back using the M8 Allen
key provided.
B. TIP: Start with the right side
of the chair with the recline
mechanism. It is much easier
to start on this side as the
mount point is fixed in place.
Do not tighten the screws down
completely until you have both
sides (all four bolts) started in
the seat back.
C. Use the screws taken from the
seat back to attach the seat
cushion and the seat back
together.
7. Attach the hinge covers onto the
hinge brackets with the screws
using the Philips head on the end
of the Allen key. Insert the rubber
plugs once the hinge covers are
fastened.
8. Congratulations on
assembling your new
T2 ROAD WARRIOR
gaming chair. Enjoy!
6 6