Corsair T2 Mode D'emploi page 4

T2 ROAD WARRIOR Assembly Instructions
WARNING: This furniture contains small parts that present a choking
hazard for children under 3 years of age. These parts are for adult
assembly only and should be permanently affixed to the furniture.
Any unused parts should be stored or discarded properly.
1. Insert the chair wheels into the
chair base by pressing the stud
firmly into the holes on the
bottom of the base.
3 3
2. Install the gas lift and gas lift
cover into the top of the chair
base by placing the larger end
into the hole in the center of the
chair base.
A. Place the gas lift cover over the
gas lift with the larger opening
facing down.
B. Remove the red protective cover
from the top of the gas lift.
C. WARNING: The seat height
adjustment will not function if the
red protective cap is not removed
from the gas lift.
3. Place the completed chair base
assembly aside.
4. Chair seat assembly.
A. Remove the four screws from the seat cushion bottom using the
M8 Allen key provided.
B. Using the four screws from the seat cushion bottom, attach the seat
control base to the seat cushion.
4 4