Grace Time Setting; Operator Card Configuration - BFT Espas 20I Instructions D'installation

14.1 - GRACE TIME SETTING

Grace time is a time value expressed in minutes, that determines how long a customer can
take to get out of the car park from the moment the barcode is printed after payment.
ATTENTION! Grace Time must be set on all devices.
INSTRUCTIONS:
- Enter the menu and scroll with LEFT and RIGHT until GRACE TIME is displayed
- Press PUSH and modify the value with UP or DOWN
- Press PUSH to confirm
GRACE TIME = 000

14.2 - OPERATOR CARD CONFIGURATION

Operator Cards allows enabling up to 400 cards using the Espas Conf. software. 400 num-
bered positions are indicated, to which the 125KHx cards can be associated; each position
has a specific function:
Position Function
1,2,3,4
5,6,7,8
9,10,11,12
13,14,15,16
17...400
INSTRUCTIONS:
- Enter the menu and scroll with LEFT and RIGHT until Operator Card is displayed
- Scroll through the positions with UP and DOWN
- When the desired position is reached , press PUSH: the value saved in that position starts
flashing: submit the card you wish to enable to the reader on the front.
- Press PUSH to confirm
OPERATOR CARDS
05.00000000 open
44 - Espas 20I
GRACE TIME = 010
10
Normal
Open
Closed
Loop (automatic)
Single pass (Free pass)
01.00000000 norm
AVVICINARE CARD
PLACE THE CARD NEAR
AL LETTORE FRONTALE
THE FRONT READER
GRACE TIME = 008
2
05.00000000 open
4
05.10456985 open
GRACE TIME = 8
CARD PROGRAMMED
CARD PROGRAMMATA
CON FUNZIONE OPEN
WITH OPEN FUNCTION
RESET BUTTON
PULSANTE DI RESET