Thank you for choosing this product. BFT are confident that its performance will meet your
operating needs. Read the literature that comes with this product carefully as it contains im-
portant information regarding safety, installation, use and maintenance.
This product meets recognized technical standards and complies with safety provisions. We
hereby confirm that it complies with the following European directives: 2014/35/EC and
2014/30/EC Directives and later amendments.
1 - GENERAL INFORMATION
The Espas 20I station is a device designed to provide complete control of the entry point of an
Espas 20 automated car-cark.
It can be used in conjunction with other Espas 20 stations for automating as many entrance
and exit points (more than one station can be connected in the same parking system).
The station is fitted with:
- sheet steel casing with protective electrophoretic and polyester coatings;
- fanfold ticket thermal printer;
- 4000-ticket sets (tickets not supplied as standard);
- 125KHz operators and pass season tickets' proximity RFID card reader;
- LDC 20x2 display to display the instructions to users;
- ticket barcode optical scanner (option for Espas 20 Hotel);
- button to display an SOS message, or entry call with a digital or IP system (option).
The Deneb control board is supplied by the manufacturer with standard settings.
Any change must be set using the joystick and the display present on the Deneb board, follow-
ing the instructions found in this document.
The main features of the Deneb control board are:
- 16-character LCD removable display and joystick to program all the station functions;
- calendar clock;
- flash memory for storing the operating configuration;
- management of the operator's cards and pass season tickets;
- Molex connectors for quick and safe wiring;
- inputs/outputs for the connection to any type of electro-mechanical barrier.
- possibility of managing optional inputs to open the barrier remotely, if re-
quired.
28 - Espas 20I