Connecting Using An Optical Cable - Samsung HW-Q600A Manuel

NOTES
• When you use Dolby Atmos®: If the input source is Dolby Atmos®, 5.1.2 channels are outputted.
• When Dolby Atmos® is activated, "DOLBY ATMOS" appears in the front display.
• Configuring Dolby Atmos® on your BD player or other device.
Open the audio output options on the settings menu of your BD player or other device and make
sure that "No Encoding" is selected for Bitstream. For example, on a Samsung BD Player, go to
Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).
Supported UHD Signals Specification (3840 x 2160p)
Frame rate (fps)
< 60
120
• Supported specification may vary depending on the connected external device or usage conditions.

Connecting using an Optical Cable

HDMI TO TV
Bottom of the Soundbar
DIGITAL AUDIO IN (OPTICAL)
1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT port of the Source
Device using a digital Optical Cable (not supplied).
2. Select "D.IN" mode by pressing the
Color depth RGB 4:4:4
8 bit
10 bit
12 bit
8 bit
10 bit
(ARC)
Top of the Soundbar

YCbCr 4:4:4
O O
- -
- -
- -
- -
Optical Cable
(not supplied)

(Source) button on the top panel or on the remote control.
ENG - 18
YCbCr 4:2:2
O
O
O
-
-
OPTICAL OUT
BD / DVD player /
Set-top box /
Game console
D.IN
YCbCr 4:2:0
O
O
O
-
-