Connecting The Soundbar; Connecting Electrical Power - Samsung HW-Q600A Manuel

03 CONNECTING THE SOUNDBAR

Connecting Electrical Power

Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following
order:
1. Connect the power cord to the Subwoofer.
2. Connect the power output cable to the power adapter, and then to the Soundbar.
3. Connect the power cord to a wall socket.
See the illustrations below.
• For more information about the required electrical power and power consumption, refer to the
label attached to the product. (Label: Bottom of the Soundbar Main Unit)
POWER
Rear of Subwoofer
• Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so
that it is hanging with the AC cord input facing upwards, water or other foreign substances could
enter the Adapter and cause the Adapter to malfunction.
Power Cord
Connecting
Electrical Power
Power Cord
Connecting
Electrical Power
AC/DC Adapter
ENG - 5
DC 24V
USB (5V 0.5A)
DC 24V
Bottom of the
Soundbar Main Unit