SCHOTT VisiLED Serie Conseils D'utilisation page 40

Important properties of the VisiLED
system with MC 1000 controller
Important properties of the VisiLED
system with MC 750 controller
38 | VisiLED-Serie
The MC 1000 controller can be used to control one VisiLED illumination unit.
The most important illumination parameters: light intensity setting, selection
of four segment modes and rotating illumination in both directions, can be er-
gonomically and intuitively controlled using clearly arranged adjustment
knobs.
If required, the complete illumination system can be earthed via an ESD con-
nector.
The MC 750 controller can also be used to control one VisiLED illumination
unit. Only the light intensity setting can be adjusted with the controller, mean-
ing it is the ideal VisiLED control unit for more simple illumination applications.
The VisiLED system is equipped with a thermo guard: the LED temperatures in
each VisiLED illumination are continuously monitored by the controller. Should
the permitted values be exceeded then following a pre-warning the affected
LED unit is switched off. The thermo guard ensures a long lifetime for the LED
illumination unit – even when set at the maximum brightness level.