Cleaning - Vollrath Mirage Manuel D'utilisation

OPERATION (CONTINUED)
Lock the Control Panel (optional)
Lock
At the same time, press and hold the function button and the arrow
down button until the lock light appears.
Unlock
At the same time, press and hold the function button and the arrow
down button until the unlock light appears.
®
Mirage Drop-in Induction Warmers and Rethermalizers Operator's Manual

CLEANING

WARNING
Electrical Shock Hazard
Keep water and other liquids from entering the inside of the
equipment. Liquid inside the equipment could cause an
electrical shock. Do not spray water or cleaning products.
Liquid could contact the electrical components and cause a
short circuit or an electrical shock.
CAUTION
Burn Hazard
Hot surfaces and food can burn skin. Allow the hot surfaces to
cool before handling. Do not drop or spill water onto the
cooking surface as it can spray or splatter.
To maintain the appearance and increase the service life, clean this
equipment daily.
What you will need:
• Three soft clean cloths, one each for cleaning, rinsing and drying
• Mild dish washing detergent
• Clean warm water
NOTICE: Failure to follow these cleaning instructions may lead to
product damage that will not be covered under warranty.
1. Unplug the equipment and let it completely cool.
2. Use a soft cloth moistened with warm water and a mild dish washing
detergent to clean the well and the rim.
NOTICE: Do NOT use cleaning solutions that contain chlorine or
bleach ingredients. Use of solutions with these
ingredients will damage the well and will void the
.
warranty
3. Use the second clean soft clean soft cloth moistened with clean
warm water to wipe all detergent from the well and the rim.
4. Use the third soft clean cloth to dry the well and the rim.
NOTICE: Failure to throughly remove all detergent or thoroughly
dry the equipment may result in damage to the
equipment.
5. The stainless steel insert is dishwasher safe.
5