Veripart VPVR144NF Mode D'emploi page 63

Hinge screw hole cover
12. Secure the upper hinge to the top left side of the cabinet with the three
screws you removed previously. Before you tighten the upper hinge
screws, make sure that the top of the door is level with the cabinet and
that the rubber gasket makes a good seal. Install the hinge cover over
the hinge on the top left side of the cabinet.
13. Remove the left hole plugs, unscrew the bolts, and remove the right
hole plugs.
14. Remove the left hole plugs, unscrew the bolts, and remove the right
hole plugs.
15. Install the right hole plugs on the left side of the door, and install the
handle on the right side of the door.
Screw
Hinge cover
Screws
Upper hinge
62