Reversing The Door Swing - Veripart VPVR144NF Mode D'emploi

REVERSING THE DOOR SWING

1. Make sure that your freezer is unplugged.
2. Pry the hinge cover up and off, remove the three screws that secure the
upper hinge to the door, then remove the hinge.
3. Remove the freezer compartment door from the cabinet.
4. Remove the screws that secure the lower hinge to the right side of the
cabinet, then remove the hinge.
5. Remove the washer and nut that secure the pin shaft to the right hole
on the lower hinge, then remove the shaft.
6. Insert the pin shaft into the left hole on the lower hinge, then secure the
shaft with the washer and nut.
Hinge cover
Screws
Upper hinge
Lower hinge
Screws
Pin shaft
60