D-Link DCS-930L Guide D'installation Rapide page 10

Caméra réseau wi-fi jour caméra infonuagique
Masquer les pouces Voir aussi pour DCS-930L:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. What is a mydlink No.? What is it used for?
Each camera has a unique eight-digit mydlink No. which will be shown on
the label on the back of your camera. This eight-digit number identifies
your device, and is required to add your device to your mydlink account.
2. What can I do if my DCS-930L is not working correctly?
Try using the Setup Wizard.
To make sure your hardware is installed correctly, make sure that:
- the power LED is lit solid green
- your Internet connection is working
- your router's LAN & WAN connections are okay
- your router supports UPnP
- your camera is on the same network as your PC
- both your PC and camera have a working Internet connection
If your camera is still not working, check your router and make sure it
has the latest firmware.
3. What can I do if I forget my
If you forget your password, you must reset the
camera. Unfortunately, this process will change
your settings back to factory default. To reset the
camera, locate the reset button on the back of
the camera. With the camera powered on, use an
unfolded paper clip to hold the button down for
10 seconds.
FAQs
®
password?
10
Reset
Button

Publicité

Table des Matières
loading

Table des Matières