First Installation; Operation; Quick Access Keys - Fagor Tedi 2000 HD Mode D'emploi

4.- FIRST INSTALLATION

When connecting the receiver for the first time, the First
●
Installation Screen appears.
Using the keys, select the desired setting for
each of the following options. Using the PR -, PR+ keys,
move through the options.
OSD Language: Select the menu language.
●
Country setting: Select the country.
●
Auto Scan: Press OK on the remote control for the
●
receiver to begin the automatic search.

5.- OPERATION

5.1.- Hot keys
"STANDBY" key: Switch between On and Standby
●
modes. The receiver goes into energy saving mode,
the signal is suspended, and the IR sensor indicator
changes from green to red. If the key is pushed again,
the receiver is reactivated and the last channel viewed
is displayed.
"MUTE" key: Mute the sound, maintaining the active
●
image. Push the mute key again to reactivate and use.
"TV/RADIO" key: Switches between television and Radio.
●
key Return to the previously selected channel.
●
"EPG" key: Electronic Programme Guide.
●
Shows information about the highlighted programme.
The information depends on the operator and is not
always available.
37