Safety Instructions - Fagor Tedi 2000 HD Mode D'emploi

1.- SAFETY INSTRUCTIONS

Before installing or using the appliance, carefully read
●
the Safety Instructions and User Manual.
Any damage or injury resulting from misuse of the
●
appliance or failure to comply with the instructions in
this manual shall exonerate the manufacturer from all
liability and render the guarantee invalid.
In order for the unit to be repaired under warranty,
●
it must be received by Fagor Electrónica in perfect
condition, in the original packaging and with all the
accessories.
POWER
RISK OF ELECTRIC SHOCK In order to reduce risk of electrical discharge, don´t remove the lid and contact a qualified technical
OVERLOADS
LIQUIDS
CLEANING
VENTILATION
CONNECTIONS
100-240v AC; 50/60 Hz
support service.
Do not overload power sockets. This may cause fire or electrical discharge.
Do not allow the appliance to come into contact with water or any other liquids.
Unplug the appliance from the power supply before cleaning. Clean the outside with a slightly damp
cloth. Do not use any type of detergent.
Do not block any of the ventilation openings. Leave at least 5 cm around the appliance to allow
ventilation and prevent overheating. Avoid exposure to the sun or other sources of heat.
Connect all the appliance components before connecting to the power supply. Shut down the receiver
and all the equipment connected to it before connecting or disconnecting any cables. Unplug the
appliance from the power supply and disconnect the antenna and television system cables during
storms or when the receiver is not in use for long periods of time.
34