Fonctions Modbus - Stübbe USF R Série Notice D'utilisation D'origine

Annexe

10.5.5 Fonctions Modbus

Func- Name
tion
Code
01 Read Coil
Status
02 Read Input
Status
03 Read Holding
Registers
04 Read Input
Registers
05 Force Single
Coil
Tab. 29

Fonctions Modbus

1) La désignation des relais (coils), des entrées (Input) et des registres démarre par « 1 » (adresse physique « 0 »).
30 USF
1)
Address
0x00 → RELAY1
0x01 → RELAY2
0x00 → INPUT1
0x01 → INPUT2
0x00 → USF Version
0x01 → Flow [l/h]
0x02 →
0x02 → Total flow [1/100 l]
0x08 → Error
0x09 → Device ID [USF]
0x0A → Flow [l/min]
0x0C → Total flow[l]
0x0E → TOF-DIF [ns]
0x10 → Sensor distance [mm]
0x12 → Speed of sound [m/s]
0x14 → -
0x16 → Speed of fluid [m/s]
0x18 → Signal strength
-
0x00 → RELAY1
0x01 → RELAY2
Data type Comment
Bit Read relay status.
Bit Read input status.
A "TRUE" logic level on the inputs are
extended to minimum 5 seconds.
Unsigned Value = 310 → V3.10
Integer
Signed Integer Value =-14400 ... +14400
→ -14400 ... +14400 l/h
-
Signed Integer
Signed Integer Value = 1 → 0.01 l
Unsigned TRUE → Sensor error
Integer FALSE → Sensor OK
Unsigned Value = 39 → Device ID = 39
Integer
Float_ABCD IEEE 32-bit floating-point
Float_ABCD IEEE 32-bit floating-point
Float_ABCD IEEE 32-bit floating-point
Float_ABCD IEEE 32-bit floating-point
Float_ABCD IEEE 32-bit floating-point
Float_ABCD IEEE 32-bit floating-point
Float_ABCD IEEE 32-bit floating-point
Float_ABCD IEEE 32-bit floating-point
- -
Bit Write relay status, if it is released to
Modbus control
value = 0x0000 → Relay off
value = 0xFF00 → Relay on
BA-2017.03.08 FR 300 866