Honeywell MN Serie Mode D'emploi page 7

INSTALLATION
It is important that the installation instructions below are followed for successful installation of this
Local Air Conditioner. Please call Customer Support if you have any difficulties or queries
regarding these installation procedures.
1
4
Installation Kit:
1. Flange Fixture + Hole Cover
2. Exhaust Nozzle Adapter
3. Exhaust Hose Connector
Installation Steps:
Through an Open Window
1. Connect the Exhaust Nozzle Adaptor to the Exhaust Hose. Connect the Exhaust Hose Connector
to the Exhaust Hose. Ensure proper fit on both ends. (See Fig. 1).
2. Install the Exhaust Nozzle to the Exhaust Nozzle Connector. (See Fig. 2).
Fig.1
2
x1
x1
(1 Piece)
(1 Piece)
(1 Piece)
=
EN 3
3
x1
5
x1
4. Exhaust Hose
5. Exhaust Nozzle
Fig.2
x1
(1 Piece)
(1 Piece)