Securing the TV to a wall (optional)
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
y
y
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
y
y
large enough to support the TV securely.
Brackets, bolts and ropes are optional. You
y
y
can obtain additional accessories from your
local dealer.
ASSEMBLING AND PREPARING
Tidying cables
1
Gather and bind the cables with the cable
management clip.
Cable management clip
2
Gather and bind the cables with the cable
holder on the back of the TV.
Cable holder
CAUTION
Do not move the TV by holding the cable
y
y
holder and cable management clip, as the
cable holders may break, and injuries and
damage to the TV may occur.
19