Mounting The Battery - dji FPV Guide De Démarrage Rapide

2. Mounting the Battery

Slide the battery cover lock on the back
1
of the remote controller down to open the
cover.
Insert the Intelligent Battery into the
2
compartment. Press the battery into place
and push upward until there is a click.
Close the cover.
3
To remove the Intelligent Battery, open the cover, press and hold the battery release
button, and push the battery downward.
3. Checking the Battery Level and Power On/Off
Press once to check the battery level.
Press once, and press again and hold
for two seconds to turn on or off.
4. Preparing the Antennas
Unfold and adjust the antennas of the remote controller. The signal strength varies
depending on the position of the antennas.
Strong
Optimal Transmission Range
4
Weak
3
2
Unfolding the Antennas
Try to keep the aircraft inside the optimal
transmission range. If the signal is weak,
adjust the antennas or fly the aircraft closer.
Battery
Release
Button
Low High