Once the concentration drops below the A1, A2 or A3 alarm threshold
less hysteresis again, the LED on the transmitter and on the central
unit is extinguished and the relays are returned to the normal state.
Alarm A4 can be acknowledged:
The acoustic warning on the central unit can be switched off:
Press the
key on the central unit. The acoustic warning on
the central unit is then switched off and Relay 4 returns to the
normal state.
Press the
key on the transmitter. The acoustic warning on the
transmitter is then switched off.
The acoustic warning is switched off automatically after 2 minutes.
NOTICE
i
i
With the factory default settings, the acoustic warning on the
transmitter is switched off.
5
Menu
The menu mode is operated by means of 6 keys – 4 cursor keys
, an Escape key
ESC
on the central unit.
Key
,
Change menu options / functions
Change symbols / figures at the cursor position
Change settings
Key
,
Change the cursor position
Key
Acknowledge entries
Acknowledge messages
Key
Return from menu mode to measurement mode
ESC
Return from a function to the menu
(if necessary, quit without executing an entry)
Dräger VarioGard
and an Enter key
and the display
5.1
Menu structure
Overview:
Menu:
MEASUREMENT MODE
Maintenance
SET LANGUAGE
DISPLAY PEAK VALUES
Access via
CLEAR PEAK VALUES
password for
DISPLAY ALARMS
maintenance
SET CLOCK
CLEAR EXPOSURE
NUMBER EXPOSURE
- - - - - - - - - - - - - - - - - -
CHANGE SLAVES
CHANGE SLAVES
TEST THE RELAYS
TRANSMITTER ACTIVE
PASSWORD MAINTAIN
PASSWORD CONFIG
DISPLAY VOLTAGE
Menu
Menu:
Configuration
Access via
password for
configuration
35