Unsuccessful Connection - Lutron TH8321WF1043 Guide De L'utilisateur

Unsuccessful connection

If you are unsuccessful in connecting the thermostat to the Wi-Fi network, you
will see a Connection Failed screen. Press t button for other tips about this
failed connection. Here are three specific reasons the connection might be
unsuccessful.
For all Connection Failed screens, pressing Done will return to the Menu screen.
Invalid Password
The password you entered is invalid. Check that you have the right password and
try again.
No IP Address
The thermostat was unable to obtain an IP address from the router. Verify the
router is correctly set up to automatically assign IP addresses. This connection
can take several minutes. If there is still no connection, remove the thermostat
from the wallplate for 10 seconds, then snap it back into place.
No Internet Link
The thermostat connected to the Wi-Fi network but was unable to establish a
connection to the internet. Check the router settings and try again. Make sure the
Ethernet cable is plugged into the router and try rebooting the router if necessary.
41
33-00066EFS—03