Lutron TH8321WF1043 Guide De L'utilisateur page 28

Adjusting humidification settings
1 Touch MENU and select Humidification.
2 Select Auto.
3 Touch s or t to select humidity level.
4 Touch Done to save your settings. Touch
Cancel to ignore changes.
5 If frost or condensation appears on the
windows, touch MENU, then select Window
Protection. (Use a lower number to prevent
frost or condensation. Use a higher
number if indoor air is too dry.)
NOTE: Window (frost) Protection is
available only if an outdoor air sensor
is installed OR if using the outdoor
temperature from the Wi-Fi connection
to get local outdoor temperature from the
Internet.
NOTE: The thermostat controls
humidification and dehumidification
as needed to maintain the desired
humidity level. Depending on how your
thermostat was installed, the thermostat
may maintain a 15% separation between
humidification and dehumidification
settings.
33-00066EFS—03
Window Protection
27
MCR34100
Humidification
MCR34128
Humidification
Off Auto
MCR34129