Dolby Digital; Audio Drc - Sony BDP-CX960 Mode D'emploi

b
PCM 96 kHz and PCM 192 kHz audio signals are
output as PCM 48 kHz audio signals when "BD
Audio Setting" is set to "Mix."
Audio ATT
Lowers the audio output level to prevent
sound distortion.
On
Enables Audio Attenuation.
Off Disables Audio Attenuation.
b
"Audio ATT" does not affect the output from the
HDMI OUT jack or DIGITAL OUT (OPTICAL/
COAXIAL) jack.

Dolby Digital

Selects the audio signals output when playing
Dolby Digital discs.
This setting affects the output from the
DIGITAL OUT (COAXIAL/OPTICAL)
jack.
Downmix Converts to output Linear
PCM
PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.
Dolby Digital Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
DTS
Selects the audio signals output when playing
DTS discs. This setting affects the output
from the DIGITAL OUT (COAXIAL/
OPTICAL) jack.
Downmix
Converts to output Linear
PCM PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.
DTS Select this when connecting
to an audio device with a
built-in DTS decoder.
48kHz/96kHz PCM
Selects the maximum sampling frequency for
the PCM signals output from the DIGITAL
OUT (OPTICAL/COAXIAL) jack.
48kHz/16bit
Outputs audio signals of
96 kHz sampling as 48 kHz/
16 bit.
96kHz/24bit
Outputs audio signals of
96 kHz sampling as 96 kHz/
24 bit. However, the signals
will be output as 48 kHz/
16 bit if the source is copy-
protected.
b
• If you select "96kHz/24bit" when an AV
amplifier (receiver) that does not support 96 kHz
is connected, no sound or a loud sound may
result.
• "48kHz/96kHz PCM" is not effective when
"Audio Output Priority" is set to "HDMI," or
"Stereo Analog."

Audio DRC

Selects the dynamic range (compression level
of the sound) setting when playing a BD or
DVD that conforms to "Audio DRC."
Auto Performs playback at the
dynamic range specified by
the disc (BD-ROM only).
Other discs are played back
at the "Standard" level.
Standard Performs playback at a
compression level between
"TV Mode" and "Wide
Range."
TV Mode
Sounds are compressed
heavily. Low sounds are
easier to hear.
Wide Range
No compression works. A
more dynamic sound is
produced.
67
,continued
US