Klarstein 10033015 Mode D'emploi page 57

Setting the timer to turn more than one cooking zone off
If use this function to more than one heating zone, the timer indicator will show the
shortest time.
Example: zone 2 setting time is 3 minutes, zone 3 setting time is 6 minutes, the timer
indicator shows "3".
set to 6 minutes
set to 3 minutes
Note: The flashing red dot next to power level indicator means the timer indicator is
showing time of the heating zone. If you want to check the set time of other heating
zone, touch the heating zone selection control. The timer will indicate its set time.
When cooking timer expires, the corresponding heating zone will be automatically
switch off and show "H".
If you want to change the time after the timer is set, you have to start from step 1.
Default working times
Auto shut down is a safety protection function for your induction hob. It shut down
automatically if ever you forget to turn off your cooking. The default working times for
various power levels are shown in the below table:
Power level Keep warm
Working timer
8
(hours)
When the pot is removed, the induction hob can stop heating immediately and the hob
automatically switch off after 2 minutes.
1 2 3 4 5
8 8 8 4 4
6 7 8 9
4 2 2 2
EN
57