Siemens LC958BB90/03 Mode D'emploi Et Notice De Montage page 33

Timer
Select run-on time
Select intermittent time
Exhaust air / circulating air
Brand logo display
Confirmation of standard
setting
The "Timer" settings area is lit.
1. Using the rotary selector, set the preferred time (5, 10 or
15 minutes).
2. Press the t button to switch to the next settings area.
The "Run-on time" settings area is lit.
1. Set the preferred time with the rotary selector.
2. Press the t button to switch to the next settings area.
The "Intermittent time" settings area is lit.
1. Set the intermittent time with the rotary selector.
2. Press the t button to switch to the next settings area.
The extractor hood can be used in exhaust air and circulating
air mode.
1. Select the "Exhaust air/Circulating air" settings area.
2. Set the operating mode with the rotary selector.
3. Press the t button to switch to the next settings area.
The brand logo can be switched on or off.
1. Select the "Display/brand logo" settings area.
2. Using the rotary selector, adjust the display.
Press the t button for approx. 3 seconds. The changes to the
standard settings are accepted.
Standard settings
33