Error Codes And Troubleshooting - Klarstein GRANDPRIX Mode D'emploi

ERROR CODES AND TROUBLESHOOTING

Code State
E01 "E01" on LCD is flashing.
E02 "E02" on LCD is flashing. The
bowl wasn't installed.
E03 "E03" on LCD is flashing.
E04 "E04" on LCD is flashing.
-- LCD is flashing.
Suggested Solution
Something goes wrong with
the appliance. It must be sent
to the approved service centre
for repairing.
Install the bowl according to
the operating instruction.
Install it according to the
operating instruction.
The temperature of appliance
is too hot. Firstly let it cool
down 30 minutes to 2 hours,
and then reboot it. It must be
sent to the approved service
centre for repairing if the
previous cooperation doesn't
work.
Press"Start/Stop" button
longer than 3 seconds to
recover it.
EN
37