Theben LU 102/180 H Manuel D'utilisation page 23

Manuale_LU102_180HF
1. Turn power off before installing Transmitter LU 102/180 HF.
2. Read the Instruction Manual carefully before proceeding.
3. Loosen the screws of the front case with a screwdriver and the screws
will not fall down, will stay at front case's screw holes (See Fig. 10) .
Fig. 10
4. Break the knock-hole of the back case (knock-hole 1 or knock-
hole 2 as per your requirement) of the junction box. Fix the rubber
grommet to the knock-hole and have the power wire through the
knock-hole (See Fig.11) .
Fig. 11
5. Connect wires as per wiring diagram (See Fig. 12) .
Fig. 12
2004.3.30 12:39 AM
Knock-hole
1 and 2
red blue
white white
Page 23
Power
wire
Rubber
grommet
brown
yellow/green
23