Publicité
Les langues disponibles
Les langues disponibles
This product is part of the Nikobus home automation system. A description of the total system can
be found in the Nikobus catalogue and operating instructions or at www.niko.be.
Connection and function
The digital switching clock allows electrical consumers to be switched according to a pro-
gram via the Nikobus system. It allows a variety of actions to be carried out in the fields
of lighting, heating and security. The switching clock has a weekly program, so that each
day of the week can be programmed individually. Such a program consists of a series of
commands. Each command comprises the following elements: selection of the channel,
1/0 state of the channel and day of the week.
In a one-step command, only one (start or stop) time is programmed. In a two-step com-
mand, both a start and a stop time are programmed. In multistep commands, a date is pro-
grammed as well, allowing the clock to function as a switching clock with a yearly pro-
gram within the Nikobus system.
The digital switching clock is connected to the Nikobus via the modular interface (05-055)
and is also supplied by the latter. The digital switching clock is available in 2 variants: the
modular 2-channel clock (05-182) and the modular 4-channel clock (05-184).
Display
Pressing the
-button causes the main
screen to be displayed, which shows the
current date, time and state:
Pressing the R-button causes the pro-
gramming screen to be displayed:
Description of the functions of the various buttons:
shows the main screen, with the current date and time and the current state of the
channels
R
shows the programming screen, to read the displayed information
h+/h-
to enter the hours when entering the time
m+/m- to enter the minutes when entering the time
Mo...Su to select the day of the week
Year
to enter the year when entering the date
Month to enter the month when entering the date
Day
to enter the day when entering the date
1/0
to define the ON/OFF state of channels 1 to 4
to manually change the switching state
N
to store data
S
to store data and terminate the operation
CL
to delete specific stored data
Reset
to delete all stored data
S/W
to adjust the summer/wintertime switchover
1x
single switching command on a specified day of the year
prior
to manually adjust the priority of switching commands
—>
to specify the start date and end date of a date range
to set the pulse duration of an ON command between 1 and 59 sec.
R+N
to read the programmed switching times at an accelerated pace
Delete all data
For a new installation or a complete reprogramming, all data in the clock must be dele-
ted. To this end, you press the Reset button. Also the current date-time will be deleted. After
pressing the Reset button all display segments will remain visible for approx. 5 sec.
Attention:
You must first enter the current date-time before the actual programming.
8+1h
88.88
I
0
88
0
I
I
0
1XP
88:88
I
0
AM
_ _ _ _ _ _ _
This product is in conformity with the european directives and standards on the condition that it is installed, maintained and used as recommended in the installation instructions and in the users manual. Specifications subject to change without prior notice.
n.v.
DIGITAL 4-CHANNEL SWITCHING CLOCK 05-184
date
hour symbol
channel on/of
year
88.88
88
88:88
time
_ _ _ _ _ _ _
weekdays
pulse duration
channel on
8
88
I
priority
88
I
block
IMP
I
88:88
pulse
I
_ _ _ _ _ _ _
weekdays
time steps
00.00
88
00:00
year
flashing
s.a. Industriepark West 40, B-9100 Sint-Niklaas — Tel. : 32-(0)3 - 760 14 70 — Fax. : 32-(0)3 - 777 71 20 — E-mail: Support@Niko.be — www.niko.be
Set current date and time
When you press and hold down the
(Year/Month/Day) and time (h+/h-/m+/m-) buttons.
+ Year
enter the year
+ Month enter the month
+ Day
enter the day
+ h+/h-
enter the hours
+ m+/m- enter the minutes
First you enter the month and then the day. The clock calculates itself the day of the week.
Mo Tu We Th Fr
Press and hold down button
Summer/wintertime
The switching clock switches fully automatically between summer/wintertime on the last
Sunday of March and October. These switching times can, however, also be programmed
manually. You can call and modify these data via the S/W-button. To save the modified
data, press the S-button.
Selectively delete data
You can selectively delete one or more commands in the switching clock. Press the R-but-
ton to select the programming screen. If no commands were entered, a blank program-
ming screen will be displayed. By repeatedly pressing the R-button you can scroll
through the previously entered commands. A selected command that is highlighted on the
screen can be removed by pressing the CL-button.
Enter date and time during programming
The following figure shows which buttons can be used to set the date and time during pro-
gramming.
Mo Tu We Th Fr
Day of the week
Manual operation of the four channels
The 4 following situations are possible.
Start position: the display indicates 0 for the relevant channel.
After the first pressing of
gram will again be followed as from the next programmed switching time.
After the second pressing of
permanently remain at 1 and the program will no longer be followed.
After the third pressing of
put will permanently remain at 0 and the program will no longer be followed.
After the fourth pressing of
will again be followed as from the next switching time.
date
flashing
time
Mo Tu We Th Fr
button you can set the current time with the date
Reset
S/W
CH
Year
Prior
0
1
0
2
1
2
3
0
3
CL
R
I/O
I/O
I/O
I/O
0
4
N
Day
h+
m+
1x
Sa Su
S
Month
h-
Enter date
Reset
S/W
CH
Year
Prior
1
2
1
2
3
3
CL
R
I/O
I/O
I/O
I/O
4
N
Day
h+
m+
1x
Sa Su
S
Month
h-
m-
Enter date
Enter time
the output changes from 0 to 1, with indication
the output remains at 1 with indication FIX, i.e. the output will
the output changes from 1 to 0, with indication FIX, i.e. the out-
the output remains at 0, with indication
Reset
S/W
CH
Year
Prior
0
1
0
2
1
2
3
4
0
3
CL
R
I/O
I/O
I/O
I/O
0
4
1x
N
Day
h+
m+
Sa Su
S
Month
h-
m-
4
m-
Enter time
4
, i.e. the pro-
, i.e. the program
Manual operation
0601 PM141-099
Publicité
