Flash Signal - ClearSounds CSC1000 Mode D'emploi

Area settings

Flash signal

Flash timing is the signalling process that tells the
phone system when a phone line is engaged. The
United States (US) uses a 600 ms timing sequence,
and the European Union (EU) uses a 100 ms timing
sequence.
The factory default setting for flash time is 600 ms.
If necessary, change the flash time.
To change the flash time
1. Press
2. Press
press
3. Press
press
4. Press
press
5. Press
at the home screen.
24
beneath Menu on the screen.
and scroll to Set Phone, and then
beneath Select.
and scroll to Set Flash, and then
beneath Select.
and scroll to your choice, and then
beneath Select.
beneath Back and then Exit to arrive