Mitsubishi Electric PAR-30MAOA Manuel D'instructions page 49

4
Manual vane angle
Select:
Outlet
F1 F2 F3
Manual vane angle
Setting
The current vane setting will appear.
Select the desired outlets from 1 through 4 with
the F1 or F2 button.
Angle
Press the F3 or F4 button to go through the
following options and select the desired setting.
F4
No
setting
Step 3
Draft
reduction*
Press the SELECT button to save the settings.
A screen will appear that indicates the setting
information is being transmitted.
The setting changes will be made to the selected
outlet.
The screen will automatically return to the
previous screen when the transmission is
completed.
Make the settings for other outlets, following the
same procedures.
If all outlets are selected,
operation.
Navigating through the screens
To return to the previous screen ......... RETURN button
Step 1 Step 2
Step 4 Step 5
All
outlets
will be
49