Night Setback; Filter Information; Error Information - Mitsubishi Electric PAR-30MAOA Manuel D'instructions

Function settings

Night setback

Function description
This control starts heating operation when the control object group is stopped and the room temperature
drops below the preset lower limit temperature. Also, this control starts cooling operation when the
control object group is stopped and the room temperature rises above the preset upper limit
temperature.
The Night setback function is not available if the operation and the temperature setting are performed
from the remote controller.
temperature may not be obtained when the air-conditioner is inactive or when the air is not clean. In this
sensor.
This function cannot be used on the Fresh Air Intake model units.
Button operation
1
Main Main menu
Restriction
Energy saving

Night setback

Filter information

Error information

Main display:
Cursor
F1 F2 F3
2 Night setback
Night setback Yes
Temp. range 19
Start 23:00
Stop 5:00
Setting display:
F1 F2 F3
46
Page
F4
The current settings will appear.
- 28
Press the SELECT button to go to the setting
screen.
F4
Main
P
SELECT button.