Sonnenkonig EASY Mode D'emploi page 48

The Ice cubes produced
are too large and stick
together .
GB
All the conditions required
to make ice are right in pla-
ce, but no ice is produced.
The ICE FULL and ADD
WATER indicators come on
at the same time.
The unit is running, but
the water is warmer than
normal.
Water leaking from the
bottom of the unit at the
front.
1�Ice from previous cycles
has been left in the water
tray.
2�The evaporator is too low
1�There is no refrigerant in
the compressor.
2�B. Compressor is broken
or fan motor is broken.
Water tray is blocked by ice
cubes.
The magnetic valve is
broken.
The silicon stopper is not
properly insertd.
48
1�Stop the unit immediately.
Do not restart the unit untill
the ice in water tray melts.
2� Move the evaporator a
little.
Call for service.
Remove the cubes from un-
der the ice shovel. Remove
the plug from the socket
and reinsert it, then press
the "ON/OFF" button. After
two minutes the unit will
restart automatically.
Replace the magnetic valve.
Please insert the silicon
stopper properly.